Wimberley P30 Quick Release Plate * MINT

Wimberley P30 Quick Release Plate. One a line of Arca-Swiss style quick-release plates for collared lenses. These plates have important innovative features that distinguish them from other plates on the market. Lens feet with larger 3/8″ mounting holes require insertion of a 3/8″ to 1/4″ reducer bushing to fasten plates using these holes.

The P-30 is a 4.43” long, double dovetail, Arca-Swiss style quick-

release plate. It is used to connect a camera lens, fitted with both a

rotation collar and tripod mounting foot, to a compatible quick-release

clamp. Wimberley plates are compatible with most Arca-Swiss style

quick-release clamps, such as those made by Wimberley, Really Right

Stuff, Kirk Enterprises, Markins, Arca-Swiss, Foba, Graf and others.

P-30 Quick-release Lens Plate

Installation Instructions

1. Determine the number of screws you need. If your lens foot has

more than one mounting hole, it is recommended that more than

one hole be used to mount the plate to keep the plate from twisting on

the foot. For a lens foot with one mounting hole, see (Fig. 4) below.

2. Use the threaded end of the slot to remove or add screws

Install Screw Slide along Slot

3. Install safety stop screws (Fig. 6 on p. 2). This is not required,

but it is highly recommended to insure the safety of your gear.

4. Determine the size of the mounting hole(s). If your lens foot

has one or more 3/8” mounting holes, install the reducer bushing

into the 3/8” mounting hole. Wimberley sells additional bushings.

5. Attach the lens plate to the foot of your lens. When removing

or installing the plate, loosen screws gradually while gently pulling the

plate flush against the screw caps to prevent binding of the screw

threads in the center slot of the plate.

6. Slide fore-aft to balance if needed

7. Tighten the screws firmly

Weight: 2.9 oz

Dimensions (L x W x H): 4.4” x 1.5” x 0.4”

Materials: Anodized 6061 Aluminum, Stainless Steel

Package Contents:

• Arca-Swiss Style Plate: P-30 Lens Plate (Qty 1)

• Mounting Screws: SW-100 — 1/4”-20 x 1/2” (Qty 2)

• Safety Stop Screws: M3 x 6mm Socket Head Cap (Qty 4)

• Hex Key: 5/32 (Qty 1)

• Hex Key: 2.5mm (Qty 1)